Picon Zero Robotics Controller for Raspberry Pi - PICONZ

Picon Zero is an Intelligent robotics controller for your Raspberry Pi based mobile robot. A built-in processor handles all the direct communication with your input and output devices, leaving you to worry about the overall control with your Raspberry Pi program.

• Supports all models of Raspberry Pi with 40 pin Connector, Zero, Model A+/B+ and Pi 2 or 3 Model B
• Programming is fully supported with an extensive Python library
• Ideal for use with Raspberry Pi Zero
• I2C Interface, leaving all GPIO pins free for your own use
• 2 Full H-Bridge motor drivers with full forward/reverse and speed control, Up to 1.5A continuous per channel (2A peak)
• 6X General purpose output channels (5V) that can be set as Digital, PWM, Servo, WS2812( aka neopixels)
• 4X General purpose inputs (5V) that can be Digital, Analog, DS18B20 (digital temperature sensor)
• All inputs and outputs use 3-pin GVS connectors (Ground, Volts, Signal), allowing 3-pin sensors, servos, etc. to plug straight in
• Dedicated socket for HC-SR04 ultrasonic sensor, Plug it straight in, or use jumper wires to mount it further away
• 5x GPIO Signals, 5V, 3V and Ground brought out to a header
• Power for outputs can be from Raspberry Pi's 5V or from an external USB input line
• Power for motors can be from internal/external 5V, or from a separate power source (3V to 11V)
• Both motor terminals have 2-pin screw connectors AND 2-pin male headers to allow maximum flexibility in connecting

Notes

Controller board is supplied fully assembled. No soldering is required.