rails

MEAN WELL

Isolated DIN Rail Mount DC/DC Converter, 24V, 1.25A, 30W

DDR-30G-24 is a DDR-30 series 30W DIN rail type DC-DC converter with main features including easy installation, ultra slim width…

WAGO

2 Wire DIN Rail Terminal Block, Push In Cage Clamp, 24AWG to 16AWG, 500V, 13.5A, Grey

• Snap-in foot mount terminal block with CAGE CLAMP® technology • Significant cost savings through the reduction of panel space …

WAGO

3 Conductor Through Terminal Block, Push In Cage Clamp, 35mm DIN Rail, 800V, 24A, 22AWG to 12AWG, Grey

• 35mm DIN terminal block with push-in CAGE CLAMP® technology • Push-in wire termination for faster installation • Fits cable si…

PHOENIX CONTACT

DIN Rail Safety Relay, DPDT, 24V DC, 5A

The PSR-SCF-24UC/URM /2X21 is a 2-pole Universal Safety Relay with forcibly guided contacts, extension module, DPDT contact conf…

BROYCE CONTROL

DIN Rail Current Monitoring Relay, SPDT, 250V, 8A

FINDER

DIN Rail Safety Relay, DPST-NO, SPST-NC, 24V DC, 10A

7S.23.9.024.0210 is a 7S series modular relay with forcibly guided contacts. It is designed for safety applications and features…

TIGER POWER SUPPLIES

2 Conductor Through Terminal Block with Lever Locks, 35mm DIN Rail, 28 AWG to 12 AWG, 400V, 20A, Grey

The TGR-QC-1-1-D from Tiger Power Supplies is 35mm DIN Rail 2 Conductor terminal block with lever locks. The new lever lock desi…

MEAN WELL

AC/DC DIN Rail Power Supply, 24V, 10A, 240W

WDR-240-24 is WDR-240 series 240W single output industrial DIN RAIL power supply. It has built-in active PFC circuit and complia…

WAGO

35mm DIN Rail Mounting Carrier, Micro Push Wire 243 Series, Orange, 6 Way

The WAGO 243 113 is an orange mounting carrier designed to hold up to six MICRO PUSH WIRE® 243 Series junction box connectors, p…

MEAN WELL

AC/DC DIN Rail Power Supply, 48V, 5A, 240W

NDR-240-48 is a NDR-240 series one economical slim 240W DIN rail power supply, adapt to be installed on TS-35/7.5 or TS-35/15 mo…

BROYCE CONTROL

Single Phase, DIN Rail Time Delay Relay, SPDT, 0.2s to 10s

The LXCVR series 1-phase under and overvoltage plus Time Delay Relay with 17.5mm DIN rail housing. It monitors own supply and de…

WAGO

Colour Coded 3 Conductor Sensor Terminal Block, Push In Cage Clamp, 35mm DIN Rail, 250V, 13.5A, 24AWG to 16AWG, Grey

• DIN 35mm rail-mounted double terminal block with push in CAGE CLAMP® technology • Push-in wire termination for faster installa…

WAGO

2 Conduct Through Terminal Block, 35mm DIN Rail Mount, 10AWG to 24AWG, 41A, 800V

The 282-101 is a 2-conductor grey Through Terminal Block with side marking and side-entry wiring. This terminal block has polyam…

MULTICOMP PRO

AC/DC DIN Rail Power Supply, 24V DC, 7.5A, 180W

MP003274 is a 180W AC-DC DIN rail mounted power supply. It is certified by CE, FCC, CB, UL, CUL certifications. Typical applicat…

WAGO

2 Conductor Miniature Through 15mm DIN Rail Terminal Block, Push Button, Push In Cage Clamp, 800V, 24A, 22 AWG to 12 AWG, Grey

• 2 Conductor terminal blocks with Push Button CAGE CLAMP® technology • Significant cost savings through the reduction of panel …

TIGER POWER SUPPLIES

4 Conductor Through Terminal Block with Lever Locks, 35mm DIN Rail, 24 AWG to 12 AWG, 600V, 32A, Grey

The TGR-QC-2-2-D32-GW from Tiger Power Supplies is 35mm DIN Rail 4 Conductor terminal block with lever locks. The new lever lock…

WAGO

1 Pole Electronic Circuit Breaker, 35mm DIN Rail, 24V DC, 8A, 50,000uF

• Space-saving ECB with one channel • Reliably and safely trips in the event of an overload and short circuit on the secondary s…

WAGO

2 Conductor Through Terminal Block with Push Button and Test Port, 35mm DIN Rail, 800V, 24A, 22AWG to 12AWG, Red

The 2202-1203 from Wago is a red 2 Conductor 35mm through terminal block with push in cage clamp and push button. The new desig…

TDK-LAMBDA

AC/DC DIN Rail Power Supply, 12V DC, 2.1A, 25W

The DSP30-12 is a 12V/25.2W 1-output DIN-rail mount Power Supply with wide range AC input, 56mm low profile, class-2 double insu…

WAGO

4 Changeover (4PDT) DIN Rail Mount Relay Module, 110V DC, 5A

The WAGO 2585-347 relay module is a DIN rail mountable interface relay designed for reliable switching and isolation in industri…

PHOENIX CONTACT

Pin & Sleeve Connector, 13 A, 250 V, DIN Rail Mount, Socket, 2P+E, Grey

EO-G/UT/SH is a pin connector pattern type G socket with extended touch proofness/shutter, grey, for mounting on a DIN rail in t…

PHOENIX CONTACT

DIN Rail Mount Terminal Block, 2 Ways, 26 AWG, 10 AWG, 6 mm², Screw

The 3044128 is a 2-position 1-level green/yellow Ground Terminal Block with a polyamide insulator, the M3 screw connection and t…

WAGO

2 Changeover (DPDT) DIN Rail Mount Relay Module, 115V AC, 6A

The WAGO 2585-527 relay module is a DIN rail mountable interface relay designed for reliable switching and isolation in industri…

TDK-LAMBDA

AC/DC DIN Rail Power Supply, 5V DC, 3A, 15W

The DSP30-5 is a 5V/15W 1-output DIN-rail mount Power Supply with wide range AC input, 56mm low profile, class-2 double insulati…

WAGO

2 Conductor Through Terminal Block with Push Button and Test Port, 35mm DIN Rail, 800V, 24A, 22AWG to 12AWG, Black

The 2202-1205 from Wago is a black 2 Conductor 35mm through terminal block with push in cage clamp and push button. The new des…