Testers, Detectors & Calibration

ACT METERS

The ACT/612 is a dual voltage intelligent battery tester, designed for 6V and 12V lead acid batteries from 1.2Ah to 100Ah, making it capable of testing 12V batteries up to 150Ah. Its the only product of its kind to have an Ampere-hour (Ah) calibration cont...

MERCURY

• Quickly test RJ45, RJ11, USB 2.0 cables & terminated BNC cables • Features LEDs for each conductor for individual continuity testing • Detachable remote tester • Low battery indicator • Includes case • Requires 1x PP3 (9V) battery (not included)

KEWTECH

Portable proving unit for use on/off site. Instantly proves the function of non-contact voltage testers before and after use. • Simple to use, just press the button and tests • Visual LED indication of function • Robust and drop-proof from 1m • Belt clip f...

DI-LOG

The Non-Contact Voltage Detectors from Di-LOG offer advanced features enabling to be utilised for many applications across the maintenance, plumbing and electrical industry. With a CAT IV 1,000V safety rating, the DL10x Series give the user a high level of...

MULTICOMP PRO

MP780770 from Multicomp Pro is a professional grade magnetic field and voltage detector, designed with IP67 dust & water resistance and drop proof up to 2 metres. This durable device is suitable for use in harsh environments and is able to detect magnetic ...

DI-LOG

• Alarm sounds and red LED light flashes when microwave leakage is detected • Large, clear backlit LCD display for easy reading • Microwave leakage detection 0-0.99mW/cm² • Alarm level at 5.0mW/cm² • Leakage volume displayed in mW/cm² with 0.01 resolution...

DI-LOG

The Non-Contact Voltage Detectors from Di-LOG offer advanced features enabling to be utilised for many applications across the maintenance, plumbing and electrical industry. With a CAT IV 1,000V safety rating, the DL10x Series give the user a high level of...

KEWTECH

Single-pole hazardous voltage and phase indication. • Meets international safety standard BSEN61010-1:2010 • Safe live phase detection • Flashing red front section plus audible warning indicates greater than 50V AC is present • Slow flashing blue LED with ...

KEWTECH

Unique dual-sensitive, non-contact voltage detector. Just press and hold the desensitising button and you can differentiate between live and earthed cables approximately 10mm apart. • Clearly detects 90-600V AC without metal contact • Two colour LEDs - gre...

KEWTECH

Clear, bright and slender - the KT1780 is the ultimate voltage detector. • AC and DC voltage tests up to 690V • Clear, oversize, luminous LED indication • Soft to touch overmoulded rubber body • Continuity Test • Self diagnostic test • Single-pole phase te...

MULTICOMP PRO

MP780768 from Multicomp Pro is a professional grade voltage detector, designed with IP67 dust & water resistance and drop proof up to 2 metres. This durable device is suitable for use in harsh environments and includes a unique vibration mode. Applicatio...

DI-LOG

The DLPK6780 kit's compact, lightweight and ergonomic design will encourage the user to carry keep it on their person ready to conduct the correct safe isolation procedure as outlined and in accordance with the 'Electricity at Works Regulations 1989.' • De...

KEWTECH

The ultimate everyday installers electrical tool - detects voltage in three modes and measures current so is able to detect open PEN situations. • 200A AC, 1kV AC, and 1.5kV DC measurements • Non-contact voltage test - the first line voltage indication whe...

BATRECYCLE

BATRECYCLE is a smart battery disposal a universal product designed to help households and businesses recycle more batteries. This is a global product that will help all countries make more efficient use of batteries and at the same time ensure they go onl...

SAGAB

A non-contact instrument with a unique shielded forked tip for unsurpassed selectivity. Only cables within the fork trigger a response, making it ideal for use within cable bundles. The presence of an AC voltage can be detected without making any disconnec...

ANSMANN

Convenient multifunction battery tester that is suitable for all common rechargeable, alkaline, lithium and zinc air batteries. • Hand-held design with large LCD display • Displays current battery capacity and voltage (mV) • Intelligent battery tesing tech...

ACT METERS

The ACT Chrome is an intelligent battery tester, designed for 12V lead acid batteries from 1.2Ah to 200Ah. It allows simulation of a full battery discharge test in seconds. A table on the meter indicates when batteries should be recharged or replaced due t...

ANSMANN

• For testing the alternator charging circuit • Suitable for testing all 12 V motor vehicle batteries • Capacity test • Battery load test • Monitors the charging process with unregulated charges • Short-circuit resistant, incorrect polarity protection

ROLSON TOOLS

Three-in-one solution for checking domestic batteries, lamps and fuses. • Checks the power level of most 1.5V and 9V batteries • Checks most lamps and fuses • Easy-to-read meter • Built-in compartment to store fuses • Supplied with a 9V battery • Tests the...

DRAPER TOOLS

Simple to use analyser, checks both the battery and alternator status. • Magnetic strip on the reverse for attaching to metal surfaces • Compatible with all 12V DC systems • Supplied with 2x 900mm insulated test leads (red with test probe and black with cr...

MARTINDALE ELECTRIC

The VIPDLOKPRO150 lock out kit contains the VI-15000 voltage indicator, matching PD690 proving device and LOKKITPRO which contains the full range of Martindale locking off devices, all supplied in two convenient soft carry cases. The kit simplifies complia...

DURATOOL

Simple, low cost tester for Voltages between 6-400V AC/DC. • DC Voltage polarity indicator • 6V, 12V, 24V, 50V, 120V, 230V and 400V LED Voltage indication • CAT III 1000V rated • IP54 Rated • Lead length: 800mm

MARTINDALE ELECTRIC

The FL30 lamp tester is ideal for the fast testing of gas filled lamps, especially low and high pressure vapour lamps. Tests most gas filled lamps by ionizing them with a high frequency Voltage of approximately 3kV. Can be used to test fluorescent and neon...

MARTINDALE ELECTRIC

Suitable for all environments including 1,000V CAT IV, the Martindale package of VI15000 Voltage Indicator and PD690S proving device is an essential safety aid for electricians, service and maintenance technicians. Safe isolation procedures require voltage...

MARTINDALE ELECTRIC

With all the benefits of the industry standard Martindale PD440 proving unit, the new S models come in an overmoulded low profile case with magnetic hanger. They are fast and easy to use, instantly supplying the full test voltage for both high and low impe...